8. Install the new oil filter cartridge with an oil fil- ter wrench, and then tighten it to the specified torque with a torque wrench. 9. Install panel G. 10. Install the engine oil drain bolt, and then tight- en it to the specified torque. Tightening torque: Oil filter cartridge: 17 Nm (1.7 m·kgf, 12 ft·lbf) Tightening torque: Engine oil drain bolt: 30 Nm (3.0 m·kgf, 22 ft·lbf) 1. Torque wrench 8-25 Make sure that the O-ring is properly seated. 1. O-ring NOTE: 8