8 2. To increase the throttle cable free play, turn the adjusting bolt in direction (a). To decrease the throttle cable free play, turn the adjusting bolt in direction (b). EBU24060 Valve clearance The valve clearance changes with use, resulting in improper air-fuel mixture and/or engine noise. To prevent this from occurring, the valve clearance 1. Locknut 2. Throttle cable free play adjusting bolt 3. Throttle cable free play 3. Tighten the locknut.
8-44 If the specified idling speed cannot be obtained as described above, have a Yamaha dealer make the EBU24043 Adjusting the throttle cable free play The throttle cable free play should be checked and, if necessary, adjusted at the intervals speci- fied in the periodic maintenance and lubrication chart. The throttle cable free play should measure 3.0– 5.0 mm (0.12–0.20 in) at the throttle lever. Period- ically check the throttle cable free play and, if nec- essary, adjust it as follows. The engine idling speed must be checked, and ad- justed if necessary, before adjusting the throttle ca- 1. Loosen the locknut. Engine idling speed: 1550–1650 r/min 5. Install the panel. adjustment.
ble free play. NOTE: NOTE: