G an hour meter (which shows the total time the key has been turned to “ON”) Odometer and tripmeter modes Pushing the “SELECT” button switches the display between the odometer mode “ODO” and the trip- meter modes “A” and “B” in the following order: ODO TRIP A TRIP B ODO To reset a tripmeter, select it by pushing the “SE- LECT” button, and then push the “RESET” button for at least three seconds. The tripmeters can be used to estimate the distance that can be traveled with a full tank of fuel. This information will enable you to plan future fuel stops.
Holding in the “SELECT” button and then turning the key to “ON” switches the display between Clock mode Pushing the “CLOCK” button switches the display between the clock mode “CLOCK” and the hour meter mode “HOUR” in the following order: G a self-diagnosis device “mph” and “km/h”. G a fuel meter G a clock NOTE: 4-5 The multifunction display is equipped with the fol- lowing: G a speedometer (which shows the riding speed) G an odometer (which shows the total distance traveled) G two tripmeters (which show the distance trav- eled since they were last set to zero) 1. “CLOCK” button 2. “RESET” button 3. “SELECT” button 4. Speedometer 5. Fuel meter 6. Clock/Hour meter 7.
Odometer/Tripmeter A/Tripmeter B EBU27291 Multifunction display 4