es with the riding speed. You may lose control and have an accident if you cannot make a sharp enough turn for the speed you are trav- EBU26602 On-Command four-wheel-drive switch This ATV is equipped with a switch to change from two-wheel drive to four-wheel drive and vice-versa. Select the appropriate drive according to the ter- rain and the conditions. G “2WD” (two-wheel drive): Power is supplied to the rear wheels. G “4WD” (four-wheel drive): Power is supplied to the rear and front wheels. To change from two-wheel drive to four-wheel drive, stop the ATV and push the switch in to the “4WD” position.
Then, the four-wheel-drive indica- tor “ ” comes on in the multifunction meter unit display. To change from four-wheel drive to two-wheel drive, stop the ATV and push the switch in to the “2WD” position. eling. 4-9 If the digits of the speedometer appear as shown when the switch is NOT being pushed, this could indicate a malfunction in the electrical system. In this case, take the ATV to a Yamaha dealer at the Always ride at a slow speed when the ATV is in four-wheel-drive differential gear lock, and al- low extra time and distance for maneuvers. All wheels turn at the same speed when the dif- ferential is locked, so it takes more effort to turn the ATV.
The effort needed to turn increas- first opportunity. WARNING NOTE: EWB00150 4