1. On-Command differential gear lock switch “4WD”/“LOCK” To release the differential gear lock, stop the ATV and push the switch to the “4WD” position. Always stop the ATV before changing from four-wheel drive to four-wheel-drive differen- tial gear lock or vice-versa. The ATV handles differently in four-wheel drive than in differential gear lock in some circum- stances. Changing from four-wheel drive to dif- ferential gear lock or vice-versa while moving may cause the ATV to handle differently unex- WARNING EWB00130 4-11 To lock the differential gear in four-wheel drive, make sure the On-Command four-wheel-drive switch is pushed in to the “4WD” position.
Stop the ATV, move the differential gear lock lever to position (a), and then push the differential gear lock switch in to the “LOCK” position. When the dif- ferential gear is locked, the differential gear lock in- dicator “DIFF. LOCK” will come on along with the indicator “ ” in the multifunction display. 1. Differential gear lock lever 2. On-Command four-wheel-drive switch “2WD”/“4WD” DIFF. LOCK 4