Yamaha YFM7FGPW — INSTRUMENT AND CONTROL FUNCTIONS

4 Always adjust the shock absorber assemblies on the left and right side to the same setting. Uneven adjustment can cause poor handling and loss of stability, which could lead to an ac- EBU19180 Auxiliary DC jack The auxiliary DC jack is located at the front right side of the ATV. The auxiliary DC jack can be used for suitable work lights, radios, etc. The auxiliary DC jack should only be used when the engine is running. 1. Set the light switch to “OFF”. 2. Start the engine. (See page 6-1.) 3. Open the auxiliary DC jack cap, and then in- sert the accessory power plug into the jack. WARNING EWB00400 cident. 4-22 Spring preload setting: Minimum (soft): 1 Standard: 2 Maximum (hard): 5 1.

Special wrench WARNING