Yamaha YFM7FGPW — PRE-OPERATION CHECKS

5-4, 8-45, 8-46, 8-48, 8-49 Always inspect your ATV each time you use it to make sure it is in safe operating condition. Always follow the inspection and maintenance procedures and schedules described in the Owner’s Wheels and tires Check wheel condition, and replace if damaged. Check tire condition and tread depth. Replace if necessary. Check air pressure. Correct if necessary. 5-5, 5-6, 5-7 ITEM ROUTINE PAGE Throttle lever Make sure that operation is smooth. Lubricate cable and lever hous- ing if necessary. Check cable free play, and adjust if necessary. 5-5, 8-44 Control cables Make sure that operation is smooth. Lubricate if necessary. 8-52 Brake pedal Make sure that operation is smooth.

Lubricate pedal pivoting point if necessary. 8-53 Make sure that operation is smooth. Lubricate lever pivoting points if necessary. 8-52 Check for cracks or damage, and replace if necessary. 8-51 Make sure that all nuts, bolts and screws are properly tightened. 5-7 Instruments, lights and Check operation, and correct if necessary. 5-7 Manual. Failure to inspect increases the possibility of an accident or equipment damage. Check operation. If soft or spongy, have Yamaha dealer bleed hy- draulic system. Check pedal free play, and adjust if necessary. Check brake pads for wear, and replace if necessary.

Check brake fluid level in reservoir, and add recommended brake fluid to specified level if necessary. Check hydraulic system for leakage. Correct if necessary. 5-2 WARNING Rear brake 5 ITEM ROUTINE PAGE Rear brake • Check operation. If soft or spongy, have Yamaha dealer bleed hy- draulic system. • Check pedal free play, and adjust if necessary. • Check brake pads for wear, and replace if necessary. • Check brake fluid level in reservoir, and add recommended brake fluid to specified level if necessary. • Check hydraulic system for leakage. Correct if necessary. 5-4, 8-45, 8-46, 8-48, 8-49 Throttle lever • Make sure that operation is smooth. Lubricate cable and lever hous- ing if necessary.

• Check cable free play, and adjust if necessary. 5-5, 8-44 Control cables • Make sure that operation is smooth. Lubricate if necessary. 8-52