6 4. Check behind for people or obstacles, and then release the brake pedal. 5. Open the throttle lever gradually and continue to watch to the rear while backing. Improper operation in reverse could make you hit an obstacle or even a person behind you, resulting in serious injury. When you shift into reverse, make sure there are no people or ob- stacles behind you. When it is safe to proceed, EBU20681 Engine break-in There is never a more important period in the life of your engine than the first 20 hours of riding. For this reason, you should read the following material carefully. Since the engine is brand new, do not put an ex- cessive load on it for the first 20 hours.
The various parts in the engine wear and polish themselves to the correct operating clearances. During this peri- od, prolonged full-throttle operation or any condi- tion that might result in engine overheating must be avoided. WARNING go slowly. EWB00720 6-4 G When in reverse, the reverse indicator light should come on. If the indicator light does not come on, have a Yamaha dealer check the elec- trical circuit. G Due to the synchronizing mechanism in the en- gine, the indicator light may not come on until the ATV starts moving. 1. Drive select lever 2. L (Low-range) 3. H (High-range) 4. N (Neutral) 5. R (Reverse) 6. P (Park) NOTE: WARNING