Kaiyi BR380JG-1E0 — CRUSHER MOTOR

10 Structure, function and maintenance standard SEN01353-00 Relief valve portion 2. When stopping crusher q When the crusher OFF switch is pressed, the supply of pressure oil from the pump to port (MA) is stopped. With the oil from the outlet port of the motor, the return circuit to the tank is closed by the control valve, so the pressure at port (MB) rises. As a result, rotation resistance is generated in the motor, so the braking effect starts. Outline q The relief valve portion consists of check valves (2) and (3), shuttle valves (4) and (5), and relief valve (1).

q When the crusher is stopped, the outlet port circuit of the motor from the control valve is closed, but the motor continues to rotate under inertia, so the pressure at the output side of the motor becomes abnormally high, and this may damage the motor. To prevent this, the abnormally high pressure oil is relieved to port (S) from the outlet port of the motor (high-pressure side) to prevent any damage. Function q If the pressure at port (MB) becomes higher than the pressure at port (MA), it pushes shut- tle valve (A) (4) and chamber (C) becomes the same pressure as port (MB). The oil pressure rises further until it reaches the set pressure of relief valve (1).

As a result, a high braking torque acts on the motor and stops the motor. q When relief valve (1) is being actuated, the relief oil and the oil from port (S) passes through check valve (B) (3) and is supplied to port (MA). This prevents cavitation at port (MA). Operation 1. When starting crusher q When the crusher ON switch is pressed, the pressure oil from the pump passes through the control valve and is supplied to port (MA). As a result, the pressure at port (MA) rises, the starting torque is generated in the motor, and the motor starts to rotate. The oil from the out- let port of the motor passes from port (MB) thought the control valve and returns to the tank. BR380JG-1E0 5