SEN01353-00 10 Structure, function and maintenance standard Brake valve Operation when pressurized oil is supplied q The brake valve consists of suction safety valve (18A) and counterbalance valve (18). q Operating the travel lever conducts the pres- surized oil from the control valve to port (PA). q Functions and operations of respective compo- nents shall conform to the following. q The pressurized oil push-opens suction safety valve (18A) and then flows to motor outlet port (MB) via motor inlet port (MA). 1) Counterbalance valve and check valve q The motor outlet side is closed by suction safety valve (18B) and spool (19), so the pres- sure at the supply side rises.
Function q When traveling downhill, the machine travel speed tends to get faster than the motor (engine) speed because of the downward force generated from its own weight. q If the machine travels with the engine at low speed, the motor may rotate without load, causing the machine to run away; resulting in a very dangerous situation. q These valves are used to prevent above by controlling the machine to travel according to the engine speed (pump delivery). 12 BR380JG-1E0