Kaiyi BR380JG-1E0 — CRUSHER

SEN01354-00 10 Structure, function and maintenance standard Principle of crushing q With the movement of swing jaw (1), contact (a) caused by the eccentricity of crankshaft (2) and the rocking motion of toggle plate (3) moves in a circle. The closer it comes to con- tact (c), the more it moves in a narrow oval movement. q Movable jaw plate (5) installed to swing jaw (1) repeat the movement in Step 1 against fixed jaw plate (4). As a result, the rock or rubble loaded into crushing chamber (6) moves to the bottom of the crushing chamber, is subjected to a powerful compression force, and is crushed.

q If lumps of metal or other hard substances that cannot be crushed are loaded inside crushing chamber (6), toggle plate (3) functions to auto- matically change shape and protect the bear- ing of crankshaft (2) from any big impact load. q The clearance of the discharged port of fixed jaw plate (4) and movable jaw plate (5) can be adjusted by changing the combination of shim plates, so it is possible to change the particle size of the crushed material. q When fixed jaw plate (4) and movable jaw plate (5) become worn, it is possible to reverse the top and bottom. This operation can be car- ried out once only.

q The wear of fixed jaw plate (4) and movable jaw plate (5) differs according to the conditions and the material being crushed, but generally speaking, these parts wear more rapidly if the crushed material includes large amounts of sand or moisture. The speed of wear also increases if the clearance at the discharge port is made small. 12 BR380JG-1E0