30 Testing and adjusting SEN02303-00 Measuring and adjusting oil pressure in work equipment and travel circuits 1 1. Preparation work k Stop the engine and gradually loosen the oil filler cap of the hydraulic tank to release the air from the tank. 1) Remove oil pressure pickup plugs (1) and (2). a Measuring and adjusting tools for oil pressure in work equipment and travel circuits q (1): Front pump discharge pressure pickup plug q (2): Rear pump discharge pressure pickup plug k Stop the machine on a level ground.
Measuring a The oil pressure in the work equipment and travel circuits (pump discharge pressure) can be checked with monitoring function of the machine monitor, too (For details, see “Special functions of machine monitor”). q Monitoring code: 01100 F pump pressure q Monitoring code: 01101 R pump pressure 2) Install nipples J2 and connect oil pressure gauges of hydraulic tester J1 . a Use the oil pressure gauge of 58.8 MPa {600 kg/cm 2 }. a Measure the oil pressure in the work equip- ment and travel circuits under the following condition. q Hydraulic oil temperature: Within operat- ing range BR380JG-1E0 25 Symbol Part No.
Part name J 1 799-101-5002 Hydraulic tester 790-261-1204 Digital hydraulic tester 2 799-101-5220 Nipple (10 × 1.25 mm) 07002-11023 O-ring