Kaiyi BR380JG-1E0 — ADJUSTING MIRRORS

30 Testing and adjusting SEN02303-00 Adjusting mirror (a1) Loosen bolt (1) of the mirror and adjust the mirror so that the operator can best see the view in front of the machine which is a blind corner from the operator's seat. a When installing the mirror, adjust so that it is possible to see any persons at the front left and right edges of the machine (both sides of the conveyor) or objects of a height of 1 m and diameter of 30 cm.

Adjusting mirrors (b1) and (c1) Loosen bolts (2) and (3) of the mirrors and adjust the mirrors so that the operator can see a person (an object 1 m high and 30 cm in diameter) stand- ing in the left side of the machine which is a blind corner from the operator's seat. Adjusting view Adjust each mirror so that the operator can see the following ranges. q Mirror (a1): Hatched part (a2) must be seen q Mirror (b1): Hatched part (b2) must be seen q Mirror (c1) : Hatched part (c2) must be seen BR380JG-1E0 47