Kaiyi BR380JG-1E0 — CHECK AND ADJUSTMENT OF JAW CRUSHER

SEN02305-01 30 Testing and adjusting Check and adjustment of jaw crusher 3. Hang a warning tag on the horn switch of the control box, then lock the control box. k When entering the top of the feeder or the inside of the crusher to carry out inspec- tion and maintenance of the crusher, or replacement of consumable parts, always follow the procedure below when carrying out the operation. If the work equipment is actuated by mis- take, there is danger that this may lead to serious personal injury. 1. Always carry out operations with 2 or more workers. One worker should stand in front of the control box to prevent any other person from turning the starting switch ON by mistake. 2.

One worker should turn the key in the starting switch to the OFF position (A), then remove the key and keep it with him. 2 BR380JG-1E0