Kaiyi BR380JG-1E0 — CHECK AND ADJUSTMENT OF OUTLET CLEARANCE

SEN02305-01 30 Testing and adjusting Reversal or replacement of swing jaw plate 2. Remove the swing jaw wedge bolt spring cover assembly (2 places), then remove 1 swing jaw wedge bolt on one side. After removing the swing jaw wedge spring cover assembly, fit the nut and leave the bolt inserted. k This machine uses cover assembly (1) with springs built into the fixed jaw plate wedge portion and swing jaw plate wedge portion. If bolts (2) of the front face of the cover are removed during disassembly, there is dan- ger that the internal parts will fly out and cause injury. Tools to use Wrench: Accessory tool No. 1 Hook: Accessory tool No. 6 Wrench: Accessory tool No. 7 Pipe: Accessory tool No.

8 Adjustable wrench: Accessory tool No. 12 Wrench: Accessory tool No. 13 k For details of the accessory tool, see “Crusher accessory tool” in Mainte- nance volume of the operation and maintenance manual. Remove the swing jaw wedge bolt spring cover assembly as follows. 1) Lift the spring cover assembly lightly with wire, taking care not to drop it. 1. Secure the crusher inspection hatch in the open position. k When pushing out the swing jaw plate wedge from the rear of the swing jaw, to prevent the movable wedge from falling, always leave one of the swing jaw plate wedge bolts inserted. 26 BR380JG-1E0