Kaiyi BR380JG-1E0 — CHECK AND ADJUSTMENT OF OUTLET CLEARANCE

SEN02305-01 30 Testing and adjusting 4. Fit swing jaw lifting hook (B) to the top surface of the swing jaw, then raise it. 4 Swing jaw: 735 kg k After removing the swing jaw plate, com- pletely remove soils, sand, etc. from the swing jaw plate fitting surfaces (swing jaw, each upper surface of swing jaw plate mount stopper and transverse stopper piece). If not removed completely, they may cause a backlash on the swing jaw plate. q When turning over, lower the swing jaw plate on top of a stand, then fit the wire to the hook on the opposite side, and insert again in the crusher frame. q When replacing the swing jaw plate, lower the worn plate on to a block once.

Lift up a new swing jaw plate with a wire rope and insert it into the crusher frame. 28 BR380JG-1E0