SEN02089-01 40 Troubleshooting Points to remember when troubleshooting 1 k Stop the machine in a level place, and check that the lock pin, blocks, and parking brake are securely fitted. k When carrying out the operation with 2 or more workers, keep strictly to the agreed signals, and do not allow any unauthorized person to come near. k If the radiator cap is removed when the engine is hot, hot coolant may spurt out and cause burns, so wait for the engine to cool down before starting troubleshooting. k Be extremely careful not to touch any hot parts or to get caught in any rotating parts. k When disconnecting wiring, always disconnect the negative (–) terminal of the battery first.
k When removing the plug or cap from a location which is under pressure from oil, water, or air, always release the internal pressure first. When installing testing equipment, be sure to connect it properly. The aim of troubleshooting is to pinpoint the basic cause of the failure, to carry out repairs swiftly, and to pre- vent reoccurrence of the failure. When carrying out troubleshooting, and important point is of course to understand the structure and function. However, a short cut to effective troubleshooting is to ask the operator various questions to form some idea of possible causes of the failure that would produce the reported symp- toms. 1.
When carrying out troubleshooting, do not hurry to disassemble the components. If components are disassembled immediately any failure occurs: 3. Check before troubleshooting 1) Is there any sign of irregularities of the machine? 2) Make checks before starting day's work. 3) Make checks of other items. 4) Other maintenance items can be checked externally, so check any item that is con- sidered to be necessary. q Parts that have no connection with the fail- ure or other unnecessary parts will be dis- assembled. q It will become impossible to find the cause of the failure.
It will also cause a waste of manhours, parts, or oil or grease, and at the same time, will also lose the confidence of the user or operator. For this reason, when carrying out troubleshooting, it is necessary to carry out thorough prior investigation and to carry out troubleshooting in accordance with the fixed procedure. 4. Confirming failure Confirm the extent of the failure yourself, and judge whether to handle it as a real failure or as a problem with the method of operation, etc. a When operating the machine to reenact the troubleshooting symptoms, do not carry out any investigation or measure- ment that may make the problem worse. 2.
Points to ask user or operator 1) Have any other problems occurred apart from the problem that has been reported? 2) Was there anything strange about the machine before the failure occurred? 3) Did the failure occur suddenly, or were there problems with the machine condition before this? 4) Under what conditions did the failure occur? 5) Had any repairs been carried out before the failure? When were these repairs car- ried out? 6) Has the same kind of failure occurred before? 5.
Troubleshooting Use the results of the investigation and inspec- tion in Items 2 – 4 to narrow down the causes of failure, then use the troubleshooting table or troubleshooting flowchart to locate the position of the failure exactly. a The basic procedure for troubleshooting is as follows. 1] Start from the simple points. 2] Start from the most likely points. 3] Investigate other related parts or information. 6. Measures to remove root cause of failure Even if the failure is repaired, if the root cause of the failure is not repaired, the same failure will occur again.To prevent this, always investi- gate why the problem occurred. Then, remove the root cause. 2 BR380JG-1E0