Kaiyi BR380JG-1E0 — FAILURE CODE [7RFKKB] SHORT CIRCUIT IN LOCK CYLINDER PULL RELAY

SEN02091-00 40 Troubleshooting Failure code [7RFKKB] Short circuit in lock cylinder pull relay 1 18 BR380JG-1E0 User code Failure code Trouble Short circuit in lock cylinder pull relay (Work equipment and pump controller (work equipment control) system) — 7RFKKB Contents of trouble • When the lock cylinder pull relay is driven, ground short circuit is detected. Action of controller • Turns output to each solenoid of the lock cylinder push and pull OFF. • Even if cause of failure disappears, system does not reset itself until engine starting switch is turned OFF. Problem that appears on machine • The lock cylinders are not pulled and their clearance adjustment is disabled.

• Horn sounds (three intermittent sounding) upon detecting a failure. Related information • The drive state (ON/OFF) of the lock cylinder pull relay can be checked with the monitoring function (Code: 25601, Relay Drive 0) • This failure code is generated when the primary (coil side) of lock cylinder pull relay has failed. A failure of the secondary (contact side) cannot be detected with this code. • The failure history is recorded.

Possible causes and standard value in normal state Cause Standard value in normal state/Remarks on troubleshooting 1 Defective lock cylinder pull relay (Internal disconnec- tion) aPrepare with engine starting switch OFF, then carry out troubleshooting without turning engine starting switch ON. R15 (male) Resistance Between (1) and (2) 100 – 500 z 2 Grounding fault in wir- ing harness (Contact with ground circuit) aPrepare with engine starting switch OFF, then carry out troubleshooting without turning engine starting switch ON. Wiring harness between C03 (female) (37) – R15 (female) (1) and chassis ground Resistance Min.

1 Mz 3 Defective work equip- ment and pump con- troller aPrepare with engine starting switch OFF, then turn engine starting switch ON and carry out troubleshooting. C03 (female) Resistance Between (37) and chassis ground 100 – 500 z