Kaiyi BR380JG-1E0 — FAILURE CODE [7RFLKA] DISCONNECTION IN ACCESSORY EPC SOLENOID

SEN02091-00 40 Troubleshooting Failure code [7RFLKA] Disconnection in accessory EPC solenoid 1 Related electrical circuit diagram 22 BR380JG-1E0 User code Failure code Trouble Disconnection in accessory EPC solenoid (Work equipment and pump controller (work equipment control) system) — 7RFLKA Contents o trouble f • When the accessory drive EPC valve circuit is driven, disconnection of the circuit is detected. Action of controller • Turns the output to the accessory drive EPC valve OFF. • Even if cause of failure disappears, system does not reset itself until engine starting switch is once turned OFF.

Problem tha appears on machine t • The primary conveyor vertical operation, the muck discharge conveyor vertical operation, or lock cylinder push/pull, primary conveyor forward rotation do not work. • Horn sounds (three intermittent sounding) upon detecting a failure. Related information • The drive state (ON/OFF) of the accessory drive EPC valve can be checked with the monitoring function (Code: 25705, Acc. EPC Curr.) • Since the controller detects a disconnection when the solenoid output is ON, turn the output ON for reproduction check after recovery. • The failure history is recorded.

Possible causes an standard val in normal sta Cause Defective accessory drive EPC valve sole- 1 noid (Internal discon- nection) Disconnection in wiring d harness (Disconnec- ue 2 tion in wiring or defec- te tive contact in connector) Defective work equip- 3 ment and pump controller Standard value in normal state/Remarks on troubleshooting aPrepare with engine starting switch OFF, then carry out troubleshooting without turning engine starting switch ON. V04 (male) Resistance Between (1) and (2) 7 – 14 z aPrepare with engine starting switch OFF, then carry out troubleshooting without turning engine starting switch ON.

Wiring harness between C03 (female) (28) – A01 – V04 (female) (2) Resistance Max. 1 z Wiring harness between C03 (female) (13), (23) – V04 (female) (1) Resistance Max. 1 z aPrepare with engine starting switch OFF, then carry out troubleshooting without turning engine starting switch ON. C03 (female) Resistance Between (28) – (13), (23) 7 – 14 z