SEN02091-00 40 Troubleshooting Failure code [7RFPKY] Short circuit in lock cylinder push relay 1 36 BR380JG-1E0 User code Failure code Trouble Short circuit in lock cylinder push relay (Work equipment and pump controller (work equipment control) system) — 7RFPKY Contents of trouble • When the output to the lock cylinder push relay circuit was OFF, an abnormal voltage was detected. Action of controller • None in particular. Problem that appears on machine • When the accessory EPC is driven during primary conveyor vertical operation, muck discharge con- veyor vertical operation, lock cylinder push/pull, or primary conveyor forward rotation, the lock cylin- ders always tend to push and relieve.
• Horn sounds (three intermittent sounding) upon detecting a failure. Related information • The drive state (ON/OFF) of the lock cylinder push relay can be checked with the monitoring func- tion (Code: 25601, Relay Drive 0) • The failure history is recorded. Possible causes and standard value in normal state Cause Standard value in normal state/Remarks on troubleshooting 1 Defective lock cylinder push relay (Internal short circuit) aPrepare with engine starting switch OFF, then carry out troubleshooting without turning engine starting switch ON.
R13 (male) Resistance Between (5) and (6) 100 – 500 z 2 Hot short in wiring har- ness (Contact with 24V circuit) aPrepare with engine starting switch OFF, then turn engine starting switch ON and carry out troubleshooting Wiring harness between C03 (female) (27) – R13 (female) (5) and chassis ground Voltage Max. 1 V 3 Defective work equip- ment and pump controller aPrepare with engine starting switch OFF, then turn engine starting switch ON and carry out troubleshooting C03 (male) Voltage Between (27) and chassis ground Max. 1 V