Kaiyi BR380JG-1E0 — FAILURE CODE [AA10NX] AIR CLEANER CLOGGING

SEN02091-00 40 Troubleshooting Failure code [AA10NX] Air cleaner Clogging 1 54 BR380JG-1E0 User code Failure code Trouble Air cleaner Clogging (Machine monitor system) — AA10NX Contents of trouble • While the engine is running, the signal circuit of the air cleaner clogging switch is opened (discon- nected from the chassis ground). Action of controller • None in particular. Problem that appears on machine • If the machine is operated as it is, the engine may be damaged. Related information • If the air cleaner clogging monitor on the machine monitor lights red while the engine is running, this failure code is recorded.

• Input from the air cleaner clogging switch (ON/OFF) can be checked in the monitoring function. (Code 04501: Monitor Input 2) Possible causes and standard value in normal state Cause Standard value in normal state/Remarks on troubleshooting 1 Clogged air cleaner (When system is nor- mal) Check the air cleaner. If it is clogged, clean or replace it. 2 Defective air cleaner clogging switch (Internal disconnec- tion) aPrepare with engine starting switch OFF, then start engine and carry out troubleshooting. S15 (male) Air cleaner Resistance Between (1) and (2) Normal Max. 1 z Clogged Min.

1 Mz 3 Disconnection in wir- ing harness (Disconnection in wir- ing harness or defec- tive contact in connector) aPrepare with engine starting switch OFF, then carry out troubleshooting without turning engine starting switch ON. Wiring harness between P02 (female) (5) and S15 (female) (1) Resistance Max. 1 z Wiring harness between S15 (female) (2) and chassis ground Resistance Max. 1 z 4 Defective machine monitor aPrepare with engine starting switch OFF, then start engine and carry out troubleshooting. P02 Air cleaner Voltage Between (5) and chassis ground Normal Max. 1 V Clogged 20 – 30 V