SEN02092-00 40 Troubleshooting Failure code [B@BAZG] Engine oil pressure too low 1 4 BR380JG-1E0 User code Failure code Trouble Engine oil pressure too low (Engine controller system) — B@BAZG Contents of trouble • Engine oil pressure drops while engine is running. Action of controller • Limits output for travel (Limits injection rate and engine speed) • Displays engine oil pressure monitor on machine monitor. • If cause of failure disappears, system resets itself. Problem that appears on machine • Engine output lowers. • If machine is operated as it is, engine may be damaged.
Related information • Engine oil pressure switch signal is input to engine controller and then transmitted to machine mon- itor. • Method of reproducing failure code: Start engine Possible causes and standard value in normal state Cause Standard value in normal state/Remarks on troubleshooting 1 Lowering of engine oil pressure (when system is nor- mal) aCheck the engine, and correct the cause of trouble if low engine oil pressure is found. 2 Defective engine oil pressure switch sys- tem aIf cause 1 is not the cause of the trouble, engine oil pressure switch sys- tem may be defective. Carry out troubleshooting for the failure code [CA435].