SEN02092-00 40 Troubleshooting Failure code [ B@BAZK] Engine oil level reduction 1 Circuit diagram related to engine oil level 6 BR380JG-1E0 User code Failure code Trouble Engine oil level reduction (Machine monitor system) — B@BAZK Contents of • trouble While the engine is stopped (with the starting switch in the ON position), the signal circuit of the engine oil level switch is opened (disconnected from the chassis ground). Action of • controller None in particular. Problem that appears on • machine If the machine is operated as it is, the engine may be seized.
• Relative information • If the engine oil level monitor on the machine monitor lights red while the engine is stopped (with the starting switch in the ON position), this failure code is recorded. Input from the engine oil level switch (ON or OFF) can be checked in the monitoring function. (Code 04501: Monitor Input 2) 1 2 Possible causes and standard value in normal state 3 4 Cause Standard value in normal state/Remarks on troubleshooting Lowering of engine oil level (When system is nor- mal) Check the oil level in the engine oil pan. If it is low, add oil.
(If this trouble occurs frequently, find the cause.) Defective engine oil level switch (Internal disconnec- tion) aPrepare with engine starting switch OFF, then carry out troubleshooting without turning engine starting switch ON. E03 (male) Engine oil level Resistance Between (1) and Normal Max. 1 z chassis ground Low Min. 1 Mz Engine oil level Resistance Normal Max. 1 z Low Min. 1 Mz Disconnection in wiring harness (Disconnection in wir- ing harness or defec- tive contact in connector) aPrepare with engine starting switch OFF, then carry out troubleshooting without turning engine starting switch ON. Between wiring harness between P02 (female) Resistance Max.
1 z (8) and E03 (female) (1) Resistance Max. 1 z Defective machine monitor aPrepare with engine starting switch OFF, then turn engine starting switch ON and carry out troubleshooting. P02 (male) Engine oil level Voltage Between (8) and Normal Max. 1 V chassis ground Low 20 – 30 V Engine oil level Voltage Normal Max. 1 V Low 20 – 30 V