SEN02092-00 40 Troubleshooting Failure code [CA227] Sensor power source 2 too high 1 Circuit diagram related to sensor power supply 2 36 BR380JG-1E0 User code Failure code Trouble Sensor power source 2 too high (Engine controller system) E15 CA227 Contents of trouble • High voltage was detected in sensor power supply 2 circuit. Action of controller • Fixes boost pressure value and continues operation. • Fixes charge temperature value and continues operation. • Limits output and continues operation. Problem that appears on machine • Engine output lowers. Related information • Method of reproducing failure code: Turn starting switch ON.
Possible causes and standard valu in normal stat Cause Defective wiring har- 1 ness connector e e Defective engine 2 controller Standard value in normal state/Remarks on troubleshooting Connecting parts between each sensor – engine wiring harness – engine controller may be defective. Check them directly. • Looseness of connector, breakage of lock, or breakage of seal • Corrosion, bend, breakage, push-in, or expansion of pin • Moisture or dirt in connector or defective insulation If cause 1 is not detected, engine controller may be defective. (Since trou- ble is in system, troubleshooting cannot be carried out.)