Kaiyi BR380JG-1E0 — FAILURE CODE [CA351] ABNORMALITY IN INJECTOR DRIVE CIRCUIT

SEN02093-00 40 Troubleshooting Failure code [CA351] Abnormality in injector drive circuit 1 4 BR380JG-1E0 User code Failure code Trouble Abnormality in injector drive circuit (Engine controller system) E10 CA351 Contents of trouble • There is error in drive power circuit of injector. Action of controller • Limits output and continues operation. Problem that appears on machine • Exhaust gas becomes black. • Combustion becomes irregular. • Engine output lowers. • Engine cannot be started. Related information • Method of reproducing failure code: Start engine.

Possible causes and standard value in normal state Cause Standard value in normal state/Remarks on troubleshooting 1 Defect in related system If another failure code is displayed, carry out troubleshooting for it. 2 Defective fuse No. 19 If fuse is broken, circuit probably has ground fault. 3 Defective relay for engine controller power supply aPrepare with engine starting switch OFF, then turn engine starting switch ON and carry out troubleshooting. Replace relay (R21, R22) for engine controller with another relay and per- form reproducing operation. If “E” of failure code goes off at this time, replaced relay is defective.

4 Disconnection in wiring harness (Disconnec- tion in wiring or defec- tive contact in connector) aPrepare with engine starting switch OFF, then carry out troubleshooting without turning engine starting switch ON. Wiring harness between B28 No.3 – R21, R22 (female) (3) Resistance Max. 0.5 z Wiring harness between R21, R22 (female) (5) – CE03 (female) (3) Resistance Max. 0.5 z Wiring harness between CE03 (female) (1) – chassis ground (T27) Resistance Max. 10 z 5 Defective engine controller If causes 1 – 4 are not detected, engine controller may be defective. (Since trouble is in system, troubleshooting cannot be carried out.)