SEN02094-00 40 Troubleshooting Failure code [D162KZ] Disconnection or short circuit in horn relay 1 6 BR380JG-1E0 User code Failure code Trouble Disconnection or short circuit in horn relay (Work equipment and pump controller (work equipment control) system) — D162KZ Contents of trouble • When the horn relay drive circuit is driven, disconnection or ground short circuit is detected. Action of controller • Turns the current to the horn relay circuit OFF. • Even if the cause of the failure disappears, the system does not reset itself until the starting switch is turned OFF. Problem that appears on machine • Horn does not sound in the following situations.
• When abnormality in mechanical system (abnormal engine coolant etc.) occurs • When all functions of work equipment stops due to overload to the equipment • When electrical system is failed Related information • The failure history is recorded. Possible causes and standard value in normal state Cause Standard value in normal state/Remarks on troubleshooting 1 Defective fuse No. 8 If the fuse No. 8 is burn, the circuit probably has a grounding fault, etc. 2 Defective horn relay (Ground fault) aPrepare with engine starting switch OFF, then carry out troubleshooting without turning engine starting switch ON. aDisconnect R04.
Horn relay R04 (male) Resistance Between (1) and (2) 100 – 500 z 3 Disconnection in wiring harness (Disconnection or defective contact with connector) aPrepare with engine starting switch OFF, then turn engine starting switch ON and carry out troubleshooting Wiring harness between C02 (female) (19) and D01 (female) (1) Resistance Max. 1 z Wiring harness between B28 No. 8 – R04 (female) (1), between D01 (female) (8) – R04 (female) (2) Resistance Max. 1 z 4 Grounding fault in wir- ing harness (Contact with ground circuit) aPrepare with engine starting switch OFF, then carry out troubleshooting without turning engine starting switch ON.
Wiring harness between C02 (female) (19) and D01 (female) (1) and chassis ground Resistance Min. 1 Mz Wiring harness between D01 (female) (8) and R04 (female) (2) and chassis ground Resistance Min. 1 Mz 5 Defective work equip- ment and pump con- troller aPrepare with engine starting switch OFF, then turn engine starting switch ON and carry out troubleshooting aDisconnect C02. Short circuit C02 (female) (19) with chassis ground. Horn Sounds