Kaiyi BR380JG-1E0 — FAILURE CODE [DAFRMC] CAN COMMUNICATION ERROR (MONITOR CONTROLLER)

SEN02094-00 40 Troubleshooting Failure code [DAFRMC] CAN communication error (monitor controller) 1 18 BR380JG-1E0 User code Failure code Trouble CAN communication error (monitor controller) (Machine monitor system) E0E DAFRMC Contents of trouble • Machine monitor detects communication error in CAN communication circuit between work equip- ment and pump controller and engine controller. Action of controller • Operates with default mode. • If cause of failure disappears, system resets itself. Problem that appears on machine • Information may not transmitted normally by CAN communication and machine may not operate normally. Related information • Method of reproducing failure code:

Turn the starting switch ON. • The failure history is recorded. Possible causes and standard value in normal state Cause Standard value in normal state/Remarks on troubleshooting 1 Disconnection in wiring harness (Disconnec- tion or defective con- tact in connector) aPrepare with engine starting switch OFF, then carry out troubleshooting without turning engine starting switch ON. Wiring harness between P03 (female) (15) – C02 (female) (32), – P04 (female) (A), – G01 (female) (8), – CE02 (female) (46), – K02 (female) (A), – C05 (male) (3) Resistance Max.

1 z Wiring harness between P03 (female) (16) – C02 (female) (22), – P04 (female) (B), – G01 (female) (7), – CE02 (female) (47), – K02 (female) (B), – C05 (male) (10) Resistance Max. 1 z 2 Grounding fault in wir- ing harness (Contact with ground circuit) aPrepare with engine starting switch OFF, then carry out troubleshooting without turning engine starting switch. Between wiring harness P03 (female) (15) – C02 (female) (32), – P04 (female) (A), – G01 (female) (8), – CE02 (female) (46), – K02 (female) (A), – C05 (male) (3), and chassis ground Resistance Min.

1 Mz Between wiring harness P03 (female) (16) – C02 (female) (22), – P04 (female) (B), – G01 (female) (7), – CE02 (female) (47), – K02 (female) (B), – C05 (male) (10), and chassis ground Resistance Min. 1 Mz 3 Hot short in wiring harness (Contact with 24 V circuit) aPrepare with engine starting switch OFF, then turn engine starting switch ON and carry out troubleshooting Between wiring harness P03 (female) (15) – C02 (female) (32), – P04 (female) (A), – G01 (female) (8), – CE02 (female) (46), – K02 (female) (A), – C05 (male) (3), and chassis ground Voltage Max.

5.5V Between wiring harness P03 (female) (16) – C02 (female) (22), – P04 (female) (B), – G01 (female) (7), – CE02 (female) (47), – K02 (female) (B), – C05 (male) (10), and chassis ground Voltage Max. 5.5V 4 Defective CAN termi- nal resistance (Internal short circuit or disconnection) aPrepare with engine starting switch OFF, then carry out troubleshooting without turning engine starting switch ON. K02 (male), P04 (male) Resistance Between (A) and (B) 120 ± 12 z 5 Defective machine monitor If causes 1 – 4 are not detected, the machine monitor may be defective. (Since trouble is in system, troubleshooting cannot be carried out.)