Kaiyi BR380JG-1E0 — FAILURE CODE [DUB0KZ] DISCONNECTION OR SHORT CIRCUIT IN BEACON SOLID STATE RELAY

SEN02094-00 40 Troubleshooting Failure code [DUB0KZ] Disconnection or short circuit in beacon solid state relay 1 30 BR380JG-1E0 User code Failure code Trouble Disconnection or short circuit in beacon solid state relay (Work equipment and pump controller (work equipment control) system) — DUB0KZ Contents of trouble • When the rotary lamp circuit is not driven, disconnection or ground short circuit is detected. Action of controller • Turns electric current to the rotary lamp relay circuit OFF. Problem that appears on machine • Rotary lamp does not light up. • Horn sounds (three intermittent sounding) upon detecting a failure.

Related information • Drive state (ON/OFF) of the rotary lamp relay can be checked with monitoring function. (Code: 25601, Relay Drive 0) • The failure history is recorded. Possible causes and standard value in normal state Cause Standard value in normal state/Remarks on troubleshooting 1 Disconnection in wiring harness aPrepare with engine starting switch OFF, then carry out troubleshooting without turning engine starting switch ON. Wiring harness between C02 (female) (9) – R11 (7) Resistance Max. 1 z Wiring harness between R11 (8) – fuse No. 9 Resistance Max.

1 z 2 Grounding fault in wir- ing harness (Contact with ground circuit) aPrepare with engine starting switch OFF, then carry out troubleshooting without turning engine starting switch ON. Wiring harness between C02 (female) (9) – R11 (7) and chassis ground Resistance Min. 1 Mz 3 Defective work equip- ment and pump con- troller or rotary lamp relay If the above items 1 – 3 are normal, the work equipment, pump controller or beacon lamp relay may be defective.