Kaiyi BR380JG-1E0 — FAILURE CODE [DXE0KY] SHORT CIRCUIT IN LS-EPC SOLENOID

40 Troubleshooting SEN02094-00 Failure code [DXE0KY] Short circuit in LS-EPC solenoid 1 Related electrical circuit diagram BR380JG-1E0 37 User code Failure code Trouble Short circuit in LS-EPC solenoid (Work equipment and pump controller (pump control) system) — DXE0KY Contents o trouble f • When the output to the LS-EPC solenoid circuit is OFF, abnormal voltage is detected. Action of controller • None in particular. (Since no current flows, solenoid does not operate.) • If cause of failure disappears, the system resets itself. Problem th appears o machine at • Travel Hi/Lo cannot be changed over, or the work equipment speed lowers.

n (Set pressure in the LS valve cannot be controlled.) • Horn sounds (three intermittent sounding) upon detecting a failure. Related information • LS-EPC electric current value can be checked with the monitoring function. (Code: 01500, LS-EPC Sol. Curr.) • The failure history is recorded. Possible causes an standard val in normal sta Cause Defective LS-EPC 1 solenoid (Internal dis- connection) d Hot short in wiring ue 2 harness (Contact with te 24 V circuit) Defective work equip- 3 ment and pump con- troller Standard value in normal state/Remarks on troubleshooting aPrepare with engine starting switch OFF, then carry out troubleshooting without turning engine starting switch ON.

V05 (male) Resistance Between (1) and (2) 7 – 14 z aPrepare with engine starting switch OFF, then turn engine starting switch ON and carry out troubleshooting. Wiring harness between C03 (female) (6) – V05 (female) (1) and chassis ground Voltag e Max. 1 V aPrepare with engine starting switch OFF, then carry out troubleshooting without turning engine starting switch ON. C03 (female) Resistance Between (6) and (3) 7 – 14 z