Kaiyi BR380JG-1E0 — H-18 THE TRAVEL SPEED IS LOW

40 Troubleshooting SEN02306-01 H-18 The travel speed is low 1 BR380JG-1E0 23 Trouble • The travel speed is low. Relative information • Travel operation may be interlocked by (1) Mode selector switch or (2) conveyor height, rendering the machine unable to travel. Radio Travel Conveyor height Operating Mode controller speed method Up Middle Down switch selection Hi Q × Panel Mi Q Q × Lever Lo Q Q × Radio — × × × Travel controller Panel — × × × Radio Hi Q × Radio controller Mi Q Q × controller Lo Q Q × Lever — — × × × Q : Machine travels at Panel — × × × selected speed. Work Radio Hi × × : Machine travels at Radio controller controller Mi × Q × Mi-speed although Hi Lo × Q × is selected.

Testing — — — × × × × : Machine does not travel • Before carrying out the troubleshooting, set the mode selector switch in the TRAVEL mode. • Carry out the following troubleshooting when the work equipment speed is normal.

Mode Operating method Radio controller switch Travel speed selection Hi Conveyor height Up Q Middle Down × Travel Lever Panel Mi Q Q × Lo Q Q × Radio controller — × × × Radio controller Panel — Hi × Q × × × Radio controller Mi Q Q × Lo Q Q × Work Lever — — × × × Radio controller Panel — Hi × × × × × Radio controller Mi × Q × Lo × Q × Testing — — — × × × Possible causes and standard value in normal state Cause Standard value in normal state/Remarks on troubleshooting 1 Malfunction of travel PPC valve aPrepare with engine stopped, then run engine at high idle and carry out troubleshooting. Travel lever PPC valve output pressure FORWARD or REVERSE Min. 2.5 MPa {Min.

26 kg/cm2} Output difference between forward and lateral directions Max. 0.39 MPa {Max. 4 kg/cm2} 2 Malfunction of self- reducing pressure valve aPrepare with engine stopped, then run engine at high idle and carry out troubleshooting. Travel lever Control circuit basic pressure Set lever in neutral 2.83 – 3.43 MPa {29 – 35 kg/cm2} 3 Malfunction of LS-EPC valve aPrepare with engine stopped, then run engine at high idle and carry out troubleshooting. Mode Travel speed Travel lever LS-EPC output pressure Travel High speed Neutral position Approx. 0.39 MPa {Approx. 4 kg/cm2} Medium or Low speed Neutral position Approx. 2.34 MPa {Approx.

23.9 kg/cm2} 4 Malfunction of travel control valve (spool) The travel control valve spool may have a malfunction. Check it directly. 5 Malfunction of pressure compensation valve or pressure compensa- tion piston The pressure compensation valve or pressure compensation piston of the control valve may have a malfunction. Check them directly. 6 Malfunction of travel control valve (suction valve) The suction valve of the travel control valve may have a malfunction. Check it directly. 7 Malfunction of shuttle valve The shuttle valve may have a malfunction. Check it directly. (When radio control specification is installed)