Kaiyi BR380JG-1E0 — REPLACEMENT PROCEDURE FOR PRIMARY BELT CONVEYOR MOTOR

SEN02738-00 50 Disassembly and assembly Replacement procedure for primary belt conveyor motor 1 3. Disconnect conveyor motor hoses (2) from the body. a After removing the hoses, put dummy plugs to their ends and motor ports. 1. Loosen tension adjustment bolt (1) to reduce the belt tension. a Loosen the tension adjustment bolts fully. a Make a mark at the original tension point in advance. q Size 03 (Flat face-to-face O-ring seal)...1 set q Size 04 (Flat face-to-face O-ring seal)...2 sets 2. Lower the conveyor assembly. (For removal, see "Removal and installation of primary belt conveyor".) 4. Fix the head pulley with a block so that it will not be misaligned with the frame.

a If right and left frame joints (3) and (4) are removed, the motor will be misaligned and may be broken. Accordingly, do not remove those joints. 20 BR380JG-1E0