50 Disassembly and assembly SEN02738-00 31. Install upper bracket (25). a M16 Ч 3 (2 places on right and left sides) 34. Remove bearing cover (28). a Before tightening the screws, see steps 29 and 30 and check the dimensions again. 32. Install lower bracket (26). a M16 Ч 3 (2 places on right and left sides) 35. Install the shaft to the frame. 33. Tighten bearing lock screws (27). (2 places in total) a Before tightening the screws, see steps 29 and 30 and check the dimensions again. 36. Insert spring pin (29). 37. Install conveyor assembly to the body. BR380JG-1E0 29