Kaiyi BR380JG-1E0 — 90 DIAGRAMS AND DRAWINGS

50 Disassembly and assembly SEN02738-00 Procedure for folding engine front cover 1 3. Remove engine front cover bottom mounting bolts (3). Right and left side: 1 place each M12: 2 pieces (Width across flats: 19 mm) a Do not remove M16 bolts (4) (1 place each on the right and left sides). (These bolts prevent the folded engine front cover from falling.) When the engine fuel supply pump or engine con- troller needs to be replaced, the engine front cover can be folded toward the magnetic separator to make a work space in front of the engine. a The magnetic separator is constantly generat- ing strong magnetism.

A person using a heart pace maker or another medical device must not approach the mag- netic separator. Since an ATM card, watch, cellular phone, dig- ital camera or another electric/electronic device can be troubled by the magnetism, do not take them near the magnetic separator. 1. Remove the wiring harnesses from the wiring harness clamps of the headlamp and rotary lamp installed to engine front cover (1) in advance. 4. While supporting the engine front cover, remove mounting bolts (5). Right and left side: 1 place each M12: 2 pieces (Width across flats: 19 mm) 2. Remove 2 caps (2) from the front side of engine front cover (1). BR380JG-1E0 31