367 Responses to errors If an error occurs during any of the following operations SAVE LOAD CHAIN *SAVE *LOAD *RUN an error message and then the message Rewind tape will be printed on the screen. The user must then rewind the tape a short way and play it again. It is not usually necessary to replay the whole program, but only far enough to load the blocks causing errors. If an error is detected during BGET# BPUT# INPUT# PRINT# *EXEC *SPOOL the tape will stop and an error will be generated. This error can be trapped by BASIC in the usual way. The user can escape at any time by pressing the ESCAPE key. The error numbers generated by the cassette file system are as follows:
216 Data cyclic redundancy check (CRC) error. 217 Header CRC error. 218 An unexpected block number was encountered. 219 An unexpected file name was encountered. 220 Syntax error – for example an illegal *OPT statement. 222 An attempt was made to use a channel which was not opened. 223 End of file reached.