373 38 Using printers The BBC Microcomputer can be used with the vast majority of printers available today. It is not possible, though, to drive old ‘Teletypes’ which operate at ten characters per second, or printers requiring a 20mA current loop connection. To use a printer with your BBC Microcomputer you will need to do three things: – Connect the printer to the computer. – Tell the computer whether your printer is plugged into the parallel or serial printer port. – Tell the computer to copy everything sent to the screen to the printer. Connect the printer to the computer As the above implies there are two possible sockets (ports) to which you can connect the printer.
The parallel printer port is often called a Centronics compatible port. Printers that need to be connected to parallel ports usually have a 36-way Amphenol socket. To connect the printer to the computer you will need a cable made up as follows from a 26-way insulation displacement connector, about one metre of 26-way ribbon cable and one 36-way Amphenol plug. The 26-way cable should be inserted into the 36-way plug so that pins 1 to 14 and 19 to 32 are connected. The cable should be inserted into the 26-way plug so that pin 1 of the Amphenol 36-way plug is connected to pin 1 of the 26-way insulation displacement plug.