427 OSBYTE call with A=&E8 (232) Enable/disable 6850 ACIA IRQ This call sets a ‘mask’ byte which is used by the operating system when servicing IRQs which may have originated from the 6850 ACIA used for the RS423 and cassette interfaces. The operating system ANDs the mask byte with the 6850 status register. See the entry above (OSBYTE &E7) for further comments. The default value is &FF. OSBYTE call with A=&E9 (233) Enable/disable system 6522 IRQ As for &E7 but affects the system 6522. The system 6522 is used extensively in the normal operation of the machine and consequently this call should be used with extreme care.
OSBYTE call with A=&EB (235) Presence of speech processor This call returns presence of speech processor. X=&FF if speech processor present X=0 if speech processor not present OSBYTE with A=&EF (239) Read/write shadow mode state This call reads (or writes to) location &27F, which contains the shadow mode flag. To read the flag, set X=0, Y=255. To write to &27F, set X=new value, Y=0. On exit, X=0 if in shadow mode, X=1 otherwise (reading). If writing, X returns the previous value of the flag. The contents of next location (ie &26C) are returned in Y.
(See chapter 42 for details of the shadow screen facility.) OSBYTE call with A=&FD (253) Last reset type This call returns a number indicating what sort of reset last occurred. Y = 0 Soft break Y = 1 Power-on break Y = 2 CTRL BREAK