463 Bad DIM 10 Arrays must be dimensioned with a positive number of elements. An error will be produced, for example, by: DIM A(-3) Bad HEX 28 Hex numbers can only include 0 to 9 and A to F. An attempt to form a hex number with other letters will result in this error, eg PRINT &y Bad key 251 An attempt has been made to provide a function key defenition with a key number greater than 15. Bad MODE 25 This indicates an attempt to change mode inside a procedure or function, or to select a mode for which their is insufficient memory. Bad program 0 There are a number of occasions on which the computer checks to see if the program that it contains starts and ends in memory.
The untrappable and fatal error Bad program indicates that the computer could not follow a program through successfully to an end mark in memory. This is caused by a read error or by loading only part of a program or by overwriting part of a program in some way. Unless you are prepared to check the contents of memory a byte at a time there is little that can be done to recover a bad program. Bad string 253 A string more than ten characters long has been passed with an operating system command (cassette filing system only). This is an error generated by the cassette filing system. It indicates that an unexpected block number was encountered. Rewind the tape a short way and play it again Sam.
Block? 218 Byte 2 An attempt was made, during an assembly language section, to load a register with a number requiring more than one byte, eg LDA #345