Cleaning and servicing en 2. Unplug the mains plug. 3. Open the lid. 5. Unlock the filter holder. 6. Remove the foam filter 1 and the → Fig. 16 4. In order to release the motor pro- Micro-Hygiene exhaust filter 1 from the filter holder. → Fig. 20 7. Tap out the foam filter 1 and the tection filter from the catch mech- anism, pull on the side tabs. → Fig. 17 5. Remove the motor protection filter Micro-Hygiene exhaust filter 1 . 8. If it is very dirty, wash the foam fil- in the direction of the arrow. 6. Tap out the motor protection filter. 7. If the motor protection filter is very ter 1 and the Micro-Hygiene ex- haust filter 1 . → Fig. 21 9.
Leave the foam filter 1 and the Mi- dirty, rinse it. → Fig. 18 8. The filter must then be left to dry cro-Hygiene exhaust filter 1 to dry for at least 24 hours. 10. Insert the foam filter 1 and the Mi- for at least 24 hours. 9. Care for the appliance and the ac- cro-Hygiene exhaust filter 1 into the filter holder. 11. Insert the filter holder into the ap- cessory parts with a standard com- mercially available plastic cleaner. 10. If required, vacuum the dust com- partment using a second appli- ance or clean it with a dry duster or dusting brush. 11. After cleaning, refit the motor pro- pliance. 12. Close the rear flap. Cleaning the HEPA hygiene filter 1 tection filter into the appliance. 12.
Lock the motor protection filter into place at the top. 13. Close the lid. Note: The filtering action of the filter remains intact, even if the filter sur- face becomes discoloured. Tips Ў For optimum performance level, Cleaning the Micro-Hygiene exhaust filter 1 once a year. After vacuuming fine dust particles, clean the HEPA hygiene filter 1 in order to guarantee the appliance's suction performance. Ў To clean the filter unit thoroughly, clean the HEPA hygiene filter 1 Tip: To achieve the best possible va- cuuming results, clean or replace the Micro-Hygiene exhaust filter 1 once a year.
After vacuuming fine dust particles, clean or replace the Micro- Hygiene exhaust filter 1 in order to guarantee the appliance's suction. you can clean the filter unit in the washing machine. To protect the rest of the laundry, put the filter unit into a laundry bag. Wash the filter unit at 30 °C using a gentle programme and the lowest spin speed. 1. Switch off the appliance. 2. Unplug the mains plug. 3. Open the rear flap. 4. Push the locking tab in the direc- tion of the arrow. → Fig. 19 1. Switch off the appliance. 1 Depending on the appliance specifications 17