Bosch — Cleaning the condensation channel and drainage hole

en Cleaning and servicing Cleaning and servicing Cleaning and servicing Ў Liquid in the lighting can be dan- gerous. ▶ The rinsing water must not run To keep your appliance working effi- ciently for a long time, it is important to clean and maintain it carefully. Customer Service must clean inac- cessible points. Cleaning by cus- tomer service can give rise to costs. into the light. ATTENTION! Ў Unsuitable cleaning products may damage the surfaces of the appli- ance. ▶ Do not use hard scouring pads Preparing the appliance for cleaning or cleaning sponges. ▶ Do not use harsh or abrasive Find out how to prepare your appli- ance for cleaning. detergents.

▶ Do not use cleaning products with a high alcohol content. Ў If you clean fittings and accessor- 1. Switch off the appliance. → Page 16 2. Disconnect the appliance from the ies in the dishwasher, this may cause them to become deformed or discolour. ▶ Never clean shelves or contain- power supply. Unplug the appliance from the mains or switch off the circuit breaker in the fuse box. 3. Take out all of the food and store it ers in the dishwasher. 1. Prepare the appliance for cleaning. → Page 22 2. Clean the appliance, the fittings in a cool location. Place ice packs (if available) onto the food. 4.

If there is a layer of hoarfrost, allow and the door seals clean with a dish cloth, lukewarm water and a little pH-neutral washing-up liquid. 3. Dry thoroughly with a soft, dry this to defrost. 5. Remove all fittings from the appli- ance. → Page 23 cloth. 4. Insert the fittings. 5. Electrically connect the appliance. 6. Switch on the appliance. Cleaning the appliance Clean the appliance as specified to ensure that it is not damaged by in- correct cleaning or unsuitable clean- ing products. → Page 16 7. Putting the food into the appliance. Cleaning the condensation channel and drainage hole WARNING Risk of electric shock!

Ў An ingress of moisture can cause Regularly clean the condensation channel and drainage hole to ensure that the condensation can drain. an electric shock. ▶ Do not use steam- or high-pres- ▶ Carefully clean the condensation sure cleaners to clean the appli- ance. channel and the drainage hole, e.g. using a moistened cotton bud. 22