Blue Smart IP67 Charger 6.2.2. Resetting the PIN code If the PIN code is forgotten/lost or does not work, it can be reset to 000000 (not the default PIN code stated on the label) using a Bluetooth enabled device (such as a mobile phone or tablet) with the VictronConnect app. Reset PIN using VictronConnect To reset the Bluetooth PIN code: 1. Locate the PUK code stated on a label located on the back of the charger and record it for use later. 2. Connect the Blue Smart IP67 Charger AC power cable to a mains power outlet; after a short delay the POWER LED will illuminate and the STATUS LED will begin to blink fast. 3.
Using a Bluetooth enabled device (mobile phone or tablet), open the VictronConnect app and locate the Blue Smart IP67 Charger in the Device list Local page. 4. Select the Device options icon (three vertical dots on the right side of the description) to access the dropdown menu. 5. Select Reset PIN code from the dropdown menu to open the Reset PIN code pop-up dialog box. Page 26 Setup