IP67 Charger — 6.2.3. Disabling Bluetooth

Blue Smart IP67 Charger 9. Bluetooth operation has now been disabled, except for 30 second after every power-up. Option #2: Disabled (Permanent and Irreversible) Note: This option will permanently disable Bluetooth; use with extreme caution, as this procedure is irreversible . To disable Bluetooth permanently: 1. Connect the Blue Smart IP67 Charger AC power cable to a mains power outlet; after a short delay the POWER LED will illuminate and the STATUS LED will begin to blink fast. 2.

Using a Bluetooth enabled device (mobile phone or tablet), open the VictronConnect app and locate the Blue Smart IP67 Charger in the Device list Local page, then connect to the device (the default PIN code is stated on a label located on the side of the charger, or try 000000 if there is no label). 3. Select the Settings icon (gear in the top right corner) to access the Settings page. 4. Select the Device options icon (three vertical dots in the top right corner) to access the Device options dropdown menu. 5. Select Product info from the dropdown menu to access the Product info page. Page 31 Setup