IP67 Charger — 7.3. Instant readout

Blue Smart IP67 Charger 7. Confirm that the charger firmware version supports instant readout functionality: A. If the current firmware version is v3.61 or above continue to step 8. B. If the current firmware version is below v3.61, update to the latest firmware version and then repeat the entire process; refer to the 'Setup > Updating firmware' section for more information. 8. Toggle the Instant readout via Bluetooth switch on to enable instant readout functionality. 9. When instant readout is enabled, the Instant readout details field is displayed beneath the Instant readout via Bluetooth field.

If the instant readout encryption data (MAC address and encryption key) is required, select SHOW from the Instant readout details field to open the Instant readout encryption data pop-up dialog; this data is not required for normal instant readout functionality via the VictronConnect app, it is only relevant for advanced integration of the instant readout data with third party Bluetooth devices and software. Page 54 Monitoring