IP67 Charger — 3. Features

Blue Smart IP67 Charger M. Recovery function The charger will attempt to recharge a severely discharged battery (even down to 0V) with low current and then resume normal charging once the battery voltage has risen sufficiently; many other chargers will not recognise a battery in this state. N. Power supply mode A specific mode to use the charger as a DC power supply; to power equipment at a constant voltage with or without a battery connected. O. Start interrupt output The 12/25(1+Si) and 24/12(1+Si) models feature a start interrupt output in addition to the main charge output; a current limited output that is active only when the charger is connected to mains.

It is typically used to drive a relay, either to warn the driver or to interrupt the start circuit of the vehicle, so that the engine cannot be started while the vehicle is still plugged in. Refer to the Start interrupt output [17] section for more information. Page 5 Features