operation en 7.4 Performing initial start-up Ў The grinder has been factory-set for optimum operation. If coffee is only dispensed drop by drop or is too thin and with too little crema, you can adjust the grinding level. → "Setting the grinding level", Page 55 Ў If you do not perform any actions on the appliance for a certain period, it will switch off automatic- ally. You can change the duration in the basic settings. → Page 60 You can change the duration in the basic settings. Ў The first beverage will not yet have its full aroma if: – You are using the appliance for the first time. – You have run a service pro- gramme. – You have not used the appli- ance for a long time.
Do not drink the beverage. After connecting the appliance to the power supply, configure the settings for initial start-up. Initial start-up only appears when switching on for the first time. 1. Open the appliance door. 2. Set the mains switch to . → Fig. 24 3. Close the appliance door. 4. Press to switch the appliance on and wait until the appliance has rinsed. 5. Follow the instructions on the dis- play. a The display will guide you through the programme. Tip: To call up brief information, press . Notes Ў If you want to set up Home Con- nect now, follow the instructions in the Home Connect app.
→ "Setting up Home Connect", Page 58 Ў If "Demo mode" is selected, only the display screens will work. You cannot dispense a beverage or run a programme. oper ation 8 Basic operation oper ation 8.1 Switching the appliance on or off Notes Ў Do not press the power switch while the appliance is operating. Ў Before switching off the power switch, switch the appliance off with . This is the only way for the appliance to rinse automatically. 7.5 General information Please bear this information in mind so that you can get the best out of your appliance. Notes Ў The appliance has been pro- grammed at the factory with stand- ard settings for optimum operation.
Ў The integrated fan switches on each time a beverage is dispensed and switches off again after around 5-7 minutes. ▶ Press . When the appliance switches on, the display shows the logo. When the appliance is switched on or off, it will rinse itself automatically. When switched off, the appliance will emit steam into the drip tray for cleaning. The appliance will not rinse itself if the appliance is still 53