en Cleaning and servicing Notes Ў The display indicates the progress of the descaling or cleaning pro- cess. Ў If your appliance has been locked, you can only operate it again once the descaling process has been carried out. Tip: In addition to the automatic rins- ing process, regularly also remove and clean the brewing unit. Cleaning Remove residues of coffee from the pipes. Descaling Remove residues of limescale from the pipes. Frost protec- tion Drain the pipes to protect the appliance during transport or storage. Brewing unit cleaning The display shows optimum cleaning of the brewing unit step by step. Beverage system clean- ing Using the service programmes 1.
Select "Care & maintenance". 2. Press "Care & maintenance". a The display shows a list. 3. Press the required programme. a The display will guide you through the programme. The display shows optimum cleaning of the outlet step by step. If a service pro- gramme is interrup- ted, e.g. due to a power failure, the ap- pliance will rinse it- self automatically. The appliance is then ready for use again. Overview of service programmes You can find an overview of the ser- vice programmes here. Note: The start image shows the re- maining number of beverages that can be dispensed until running the programme and the duration. INTENZA fil- ter Insert, replace or re- move the water filter.
Milk system cleaning Tips Ў If you are starting the "Descaling" or "calc'nClean" programme, keep a container with a capacity of min. 0,5 l at the ready. Ў If you use a water filter, this will prolong the time until you have to run a service programme. Ў You can combine "Descaling" and "Cleaning" with the "calc'nClean" service programme. Rinse the milk sys- tem automatically. calc'nClean Combine cleaning and descaling. Re- move residues of limescale and coffee from the pipes. 64