operation en 3. Set the required temperature. → Page 21 Setting the storage container temperature 1. To reduce the temperature, slide 7.2 Operating tips the temperature controller in the Ў Once you have switched on the direction. 2. To increase the temperature, slide appliance, the set temperature is only reached after several hours. Do not put any food in the appli- ance until the set temperature has been reached. Ў The front panels of the housing are direction. → Fig. 13 the temperature controller in the Setting the freezer compartment temperature temporarily heated slightly. This prevents condensation in the area of the door seal. Ў When you close the door, a va- 1.
Select the freezer compartment with . 2. Press / repeatedly until the temperature display (freezer com- partment) shows the required tem- perature. The recommended temperature in the freezer compartment is −18 °C. cuum may be created. The door is then difficult to open again. Wait a moment until the vacuum is offset. 7.3 Switching off the appli- ance ▶ Press and hold for ten seconds. 7.5 Button lock (childproof lock) 7.4 Setting the temperature The button lock prevents the appli- ance from being operated accident- ally or incorrectly while running. Setting the refrigerator compartment temperature 1. Select the refrigerator compart- ment using . 2.
Press / repeatedly until the temperature display (refrigerator compartment) shows the required temperature. To reach the set temperature, slide the temperature controller for the storage container to a position that is one third from the bottom. → Page 21 The recommended temperature in the refrigerator compartment is 4 °C. Switching on the button lock ▶ Press and hold for three seconds. a lights up. Switching off the button lock ▶ Press and hold for three seconds. a lights up. 21