2.1 Before Test 2. Cranking Test (12V&24V) The engine and all other accessory loads must be OFF before test in order to have accurate results. 1) The RED (+) Positive Battery Clamp is connected 2.2 Steps to the (+) positive battery terminal, and the BLACK (-) Negative Battery Clamp is connected to the (-) negative battery terminal. Ensure that the clamps have a firm, secure grip on the battery terminals for accurate results. 2) The device will jump to main menu automatically after 3 seconds, then select "CRANKING TEST":
MAIN MENU BATTERY TEST CRANKING TEST CHARGING TEST REVIEW DATA LANGUAGE ABOUT 3) Press "ENTER/PRINT" to enter the "CRANKING TEST" interface, start the engine according to the prompts. CRANKING TEST PLEASE START ENGINE 30 4) The result will show as below: EN I 10