NOTE: 1. Only the last test result can be viewed and printed. 2. If your battery voltage is under 9.5V, the printing function will be unavailable. SECTION 8 UPDATE A computer with Windows XP/7/8/10 system is required. 1) Go to www.topdon.com/products/bt600, click "DOWNLOADS" of the page, and select "Update Tool" to download the update tool to your computer. 2) Install the Update Tool and log in. NOTE: Any TOPDON account is able to log in. If you don't have an account, register an account with your email address first. 3) Connect the tester to the computer via the USB cable included with the package.
4) Register the tester, the information of the tester will be shown on the My Device interface. Confirm the serial number is correct. (This step is not necessary if you've already registered the decive.) 5) Select "Upgrade" , the newest firmware version will show up. Tap "Upgrade" , the software will start to upgrade the tester. Wait until it prompts successful. EN I 23