4 Use and drive 89 4 -1 Charging and discharging descriptions Tip ● Please contact BYD Auto Authorized Service Station or local electrician to select the appropriate power supply according to the requirements of the charge device. ● Grounding description of charging equipment: The device must be well grounded. If the charge device is faulty or damaged, the grounding wire can provide the circuit discharge with minimum impedance to reduce the risk of electric shock. The device is provided with a grounding wire to connect the device grounding point and the grounding point of the power supply plug. The plug must be matched with a properly-installed and well-grounded electrical outlet.
Note ● During charging, do not wind up the charging connecting wires, otherwise the heat dissipation will be impaired. ● Please refer to the charging instructions for the detailed charging precautions. Warning ● Please refer to the charging safety warnings in the charging instructions for the detailed charging safety warnings. ● The maximum working environment temperature is 50℃. When not in use, please store this product in a cool and dry place. ● During charging, it’s prohibited to place the equipment in the trunk, beneath the vehicle head, or near the tires. ● During use, avoid the vehicle rolling, falloff, and manual treading.
● It’s prohibited to fall off or directly pull the cables for movement of this equipment. Handle with care during movement. ● It’s prohibited to refit, disassemble, or repair the charging equipment or related ports. ● It’s not recommended to use any additional wire or adapter. If the use of additional adapter is required, please use the wires of appropriate wire diameter (≥1.5mm2 wires) and ensure that the adapter parameters meet the specification. ● It’s prohibited to use this charging equipment whenever the household power socket wires are softened or the charger cables are worn or their insulation layers are cracked or otherwise damaged.
● It’s prohibited to use this equipment whenever the charger, power plug, or power socket is disconnected or cracked or its surface is damaged.