C2SBM-Q User's Manual 2-3 Processor and Heatsink Installation Warning : When handling the processor package, avoid placing direct pressure on the label area of the fan. ! Notes: 1. Always connect the power cord last and always remove it before adding, removing or changing any hardware components. Make sure that you install the processor into the CPU LGA 775 socket before you install the CPU heatsink. 2. The Intel LGA 775 Processor package contains the CPU fan and heatsink as- sembly. If you buy a CPU separately, make sure that you use only Intel-certified multi-directional heatsink and fan. 3. Make sure to install the motherboard into the chassis before you install the CPU heatsink and fan.
4. When purchasing an LGA 775 Processor or when receiving a motherboard with an LGA 775 Processor pre-installed, make sure that the CPU plastic cap is in place and none of the CPU pins are bent; otherwise, contact the retailer immediately. 5. Refer to the MB Features Section for more details on CPU support. Installation of the LGA 775 Processor PnP cap on top of the load plate 1. Press the load lever to release the load plate, which covers the CPU socket, from its locking position. Load lever 2. Gently lift the load lever to open the load plate. Load plate (with PnP cap attached) 2-2